膠帶初粘性滾球試驗機測試方法：
將試樣的粘貼面朝上置于傾斜30°的試驗板上，兩端分別以膠帶及砝碼固定，然后取鋼球從*大號開始，依次由傾斜板上自由滾下，記錄能粘在試片上達5秒以上的球號。
膠帶初粘性滾球試驗機符合標準：
1. GB/T 4852-2002 壓敏膠粘帶初粘性測試方法(斜面滾球法)
膠帶初粘性滾球試驗機規格參數：
1. 儀器型號：SZ-6703
2. 測試片數：4片
3. 試樣規格：寬=10～15mm，長=400mm
4. 鋼球規格：直徑=1/32～1inch
5. 傾斜板厚度：5mm
6. 傾斜板材質：玻璃
7. 傾斜角度：20～40°可調
8. 助跑道長度：100mm
9. 試驗砝碼：直徑=50mm，重量=500g±10g
10. 主機尺寸：W480×D300×H200mm
11. 主機重量：17kg
膠帶初粘性滾球試驗機英文介紹：
Tape Initial Adhesion Rolling Ball Tester
Model: SZ-6703
Turn the adhesive surface of specimen upward and place it onto the test plate inclining 30°fix two ends with tape and weight respectively. Release freely the steel balls from large one down to small one is sequence on the top end of testing plate. Record the number of steel ball which can stay on the tape for at least 5 seconds.
Ⅰ Test Standard:
1. GB/T 4852-2002 壓敏膠粘帶初粘性測試方法(斜面滾球法)
Ⅱ Specifications:
1. Model: SZ-6703
2. Testing Specimen: 4 pcs
3. Sample Size: Width=10～15mm, Length=400mm
4. Steel Ball Size: Diameter=1/32～1inch
5. Test Plate Thickness:5mm
6. Test Plate Material: Glass
7. Angle of Inclination: 20～40°Adjustable (Normally 30°)
8. Aided-running Distance:100mm
9. Load Weight: Diameter=50mm, Weight=500g±10g
10. Dimension: W480×D300×H200mm
11. Weight:17kg
